fbpx
Authorised in New Zealand as the Sole Distributor for Everbrite Coatings
Nationwide overnight delivery from our Auckland Warehouse
Sales & Personal Customer Service | Training
Phone Support: 9.00am to 4.00pm M-F

Everbrite EBK960SMS Large Kit for Mild Steel & Corten Steel (Satin)

$355.00 incl. GST

Product Code: EBK960-SMS for mild & corten steels
Large Kit for coating steels contains 946mL of Everbrite Protective UV Clearcoat in SATIN. Keep corten steel protected. Keep all mild steels looking fresh and clean. This kit will coat 5 square metres of  steel outdoors with the recommended 4 coats or 6.5 square metres of steel indoors with 3 coats (such as fireplace surrounds)
NOTE: If the metal to be coated has been rusted artificially with a solution of vinegar, lemon, salt, hydrogen peroxide or a rust hastener then there will be acid on the surface which needs to be neutralised. Order the other kit EBK960SMS-EZprep which contains the EZPrep Neutralising Concentrate.
See Description for more details…

Description

EBK960-SMS Large Satin Coating Kit for Steel

EBK960-SMS large SATIN coating kit for Steel to keep corten steel protected. Keep all mild steels looking fresh and clean. Contains 946mL of Everbrite Protective UV Clearcoat in SATIN. This kit will coat 5 square metres of  steel outdoors with the recommended 4 coats or 6.5 square metres of steel indoors with 3 coats (such as fireplace surrounds)

NOTE: If the metal to be coated has been rusted artificially with a solution of vinegar, lemon, salt, hydrogen peroxide or a rust hastener then there will be acid on the surface which needs to be neutralised. Order the other kit EBK960SMS-EZprep which containes the EZPrep Neutralising Concentrate.

This is an easy to use DIY clear metal coating used to seal rusted corten and protect steels. Everbrite SATIN finish is the popular fnish for rusted corten and mild steels. SATIN has a shelf life of 4 to 5 years when stored in its screw top can therefore when a maintenance coat is required your stored coating can still be used.

Mild Steels    Rusted Corten
Corten and rusted mild steels require a minimum of 3 coats (indoors) or 4+ coats (outdoors)

Kit Contents

1 x 946 mL can Everbrite Protective UV Clearcoat – SATIN – Will cover approx. 5 sqm of steel with 4 coats (outdoors) or 6.5 sqm of steel with 3 coats (indoors) 
3 x Fine Grey Preparation Cleaning Pads – Assists with smoothing the metal ready for coating.
1 x Microfibre Cloth – Use to wipe away residue or for Solvent wiping with Acetone (Acetome is available from hardware stores)
1 x Pair Nitrile Gloves Wear to protect hands
1 x Everbrite Compatible 50mm Paint Brush For first coat apply with paint brush (or use a roller – from hardware store)
1 x Microfibre Round Applicator Pad with hand gusset Use pad for coating panels, railings, cylindrical items (for 2nd and subsequent coats only)
1 x Instructions and Safety Data Sheet 

Includes access to our Customer Service Help Desk

Everbrite Protective Coating is also used to restore and protect:

  • Powdercoated and anodised window joinery
    Allow 100mL of coating to cover (1) coat to 20 lineal metres of joinery that is 100mm wide.
    Allow for two (2) coats on the exposed sunny sides of buildings.
    Do the Wet Test on faded powdercoatings and old paintedsurfaces:  You can test to see what the finished result will be like by wetting and cleaning an area. Observe the wetted area while it is wet because this is the result you will get when the coating has been applied.

Garage and Storage Doors
A Single Garage Door requires at least 400mL of coating – Order an EBK480 Kit  (473mL)
A Double Garage Door requires at least 600mL of coating – Order an EBK960 Kit (946 mL)

Faded paintwork
Shop frontage signs and outdoor billboards

Brass    Copper   (Outdoors)
Everbrite should be used on copper and brass located outdoors.
For Indoor items subject to use and abuse use ProtectaClear Coating.

Bronze
Everbrite is used by well renown bronze sculptors through the world.

Fibreglass and Hard Plastics

Delivery

Orders are despatched ready for courier pick up same working day when received prior to 11.00am.
Orders are usually delivered within 1 to 2 working days.
Tracking Details and delivery updates are automatically sent by email.

Please ensure that the correct delivery type is selected.

  • Standard
  • Rural
  • Click and Collect – from Howick, Auckland – By prior arrangement

Keep Corten Steel protected – DIY

Reviews

There are no reviews yet.

Be the first to review “Everbrite EBK960SMS Large Kit for Mild Steel & Corten Steel (Satin)”