Authorised in New Zealand as the Sole Distributor for Everbrite Coatings
Nationwide overnight delivery from our Auckland Warehouse
Sales & Personal Customer Service | Training
Phone Support: 9.00am to 4.00pm M-F


Shop Now

When you order your Everbrite Coating before 11.00am our aim is to despatch same day.  If you are unsure about which Coating type to order refer to the information below or go to Surface Types


There will be no Orders despatched on Mon 17th January.
Daily Despatch resumes on Tues 18th January


SHOP Everbrite™ Coatings

Coating for the restoration of faded aluminium joinery and garage doors, powdercoated, painted and anodised metals.
For coating and protecting outdoor copper, bronze and brass from fading and tarnishing.
For sealing Rusted Corten Steel and all Mild Steels.

All Everbrite kits
Natural Gloss kits
Satin kits
Cleaners and Polishes for Metals
Application Tools

SHOP ProtectaClear® Coatings

For coating and protecting indoor copper, bronze and brass, silver and all stainless steel fittings. 
For coating and protecting outdoor bare metals such as bare aluminium, stainless steel.
This is the coating for the marine environment, and around swimming pools.

All ProtectaClear kits
Natural Gloss kits
Natural Gloss kits with METAL POLISH
Satin kits
Cleaners and polishes for Metals

SHOP CrobialCoat™ Coatings

For coating and protecting surfaces from bacteria build-up. This combines the tough protection and long lasting durability and scratch resistance of our ProtectaClear® coating with Microban® antimicrobial technology

All CrobialCoat Kits - Anti microbial



Everbrite manufactures DIY crystal clear coating formulations to restore and protect metals and other hard surfaces from tarnish, rust, corrosion, colour fade, chalking, oxidation and UV rays. Suitable for all metals: bare, painted, anodised, powder-coated, unpainted, galvanised, mild, rusted corten) and other hard surfaces like fibre-glass, hard plastic, wood and ceramics. It depends on the surface type and environment as to which coating to use. Once cured all of our coatings are heat resistant up to 260 – 285 degrees centigrade. The coatings will gas off at about 350 degrees centigrade.



This maintainable DIY coating restores powder-coated, anodised and painted metals and fibreglass suffering from colour fade, oxidisation and surface damage caused by sun, salt air, house wash chemicals, sunscreen lotion etc.

Everbrite is the coating to use to protect bare coloured metals like copper, bronze and brass when located outside.

Everbrite is also the coating to use to seal rusted corten steel and mild and galvanised steels, although if they were high touch items like table tops then you would use Protectaclear® and increase the number of coats.

Natural Gloss, Satin/Matte finishes are available.



ProtectaClear® is a very tough, durable clear coating with a pencil hardness of H8. It is the best coating for highly polished bare smooth metals like brass, bronze, copper, silver, stainless steel and bare aluminium; and for use on highly touched items that are subject to a lot of handling and abuse. This coating is food safe when cured.

  • Taps, Fixtures & Fittings, Handles, Knobs,
  • Kickplates, Banisters/Balustrades, Railings
  • Jewellery, Ornaments, Utensils
  • Splashbacks, Sinks, Benchtops, Tabletops
  • Marine – Aluminium boats

Always use Protectaclear® on brushed or highly polished stainless steel whether inside or outside. You can also use ProtectaClear® for mild steels and rusted corten, wood, ceramics (instead of Everbrite) for high touch items such as benchtops, table tops but you will need to apply more coats as these metals are so porous.

Natural Gloss, Satin/Matte finishes are available.



CrobialCoat™ is a tough, durable clear coating with the added advantage of Microban technology which inhibits the growth of bacteria on hard surfaces. This coating is food safe when cured.

Ideal for areas where bacterial germs are likely to settle from being frequently touched by the public; such as lift buttons, banisters, taps and handles in environments such as:

  • Hospitals, Rest Homes
  • Hotels, Motels, Casinos
  • Restaurants, Bars, Cafes
  • Schools and Universities
  • Shopping Malls, Supermarkets

Can also be used over surfaces that have been precoated with ProtectaClear®